Fortinet FortiGate 1000A-LENC Quick Start Manual

LED State
Green
Power
Off
Green
Ports 1 to 10
Flashing
Amber
Visit these links for more information and documentation for your Fortinet product.
• Technical Documentation - http://docs.forticare.com
• Fortinet Knowledge Center - http://kc.forticare.com
• Fortinet Technical Support - http://support.fortinet.com
Package Contents
LCD
1000A -LENC
Control
Buttons
Remote
Management
Modem Port
Connecting
Connect the following to the FortiGate unit. Ensure the FortiGate unit is placed on a stable
surface or install in a standard 19 inch rack.
• Insert a network cable to port 1. Insert the other end to the router connected to the Inter-
net, or to the modem.
• Connect a network cable to the Internal port. Insert the other end to a computer or
switch.
• Connect the AC Power Cord to the Power Supply.
• Connect the redundant DC Power Supply to the FortiGate unit if applicable.
• Connect the Power Cord to a surge protected power bar or power supply.
Configuration Tools
Web-based manager
The FortiGate web-based manager is an easy to use management tool.
Use it to configure the administrator password, the interface and default gateway addresses,
and the DNS server addresses.
Requirements:
• An Ethernet connection between the FortiGate unit and management computer.
• A web browser such as FireFox or Internet Explorer on the management computer.
Description
The FortiGate unit is on.
The FortiGate unit is off.
The correct cable is connected to the copper
10/100/1000 interface and the connected equip-
ment has power.
Network activity at this interface.
The interface is connected at 1000 Mbps.
Connector Type Speed
Ports 1 to 10 RJ-45 1000 Base-T
CONSOLE RJ-45 9600 bps
USB USB
Serial Port
Front
USB
1 to 10
Interface
Back
Alarm
Cancel
Button
Power
Connections
QuickStart Guide
© Copyright 2008 Fortinet Incorporated. All rights reserved.
Products mentioned in this document are trademarks or registered trademarks
of their respective holders.
Regulatory Compliance
FCC Class B Part 15 CSA/CUS
6 June 2008
Protocol Description
Ethernet Copper gigabit connection to 10/100/1000 copper networks.
RS-232 serial Optional connection to the management computer. Provides access to
the command line interface (CLI).
USB Optional connection to a USB key for firmware backup and installation.
Straight-through
and cross over
Ethernet cables
Power Cable
Power
Supply
LEDs
Straight-through Ethernet cables
connect to the Internet or
Command Line Interface (CLI)
The CLI is a full-featured management tool. Use it to configure the administrator password,
the interface addresses, the default gateway address, and the DNS server addresses. To
configure advanced settings, see the Tools and Documentation CD included with the
FortiGate unit.
Requirements:
• The RJ-45 to DB9 serial connection between the FortiGate unit and management com-
puter.
• A terminal emulation application (HyperTerminal for Windows) on the management
computer.
-LENC
1000A
01-30006-0330-20080606
RJ-45 to
Tools and Documenation
DB-9 Serial Cable
Rack-Mount Brackets
1000A -LENC
RJ-45 to DB-9 cable connects
to serial port on management
other networks
computer
Power cables connect
to power outlets
FortiGate-1000A-LENC
QuickStart Guide
FortiGate-30B
1000A -LENC
FortiGate
Copyright 2008 Fortinet Incorporated. All rights reserved.
Trademarks
Products mentioned in this document are trademarks.
Welcome | Bienvenue | Willkommen | ?迎 | 歓迎 | Bienvenido | Benvenuto