Creating Mc Programs - Omron C200H-MC221 Operation Manual

Creating MC Programs

8-12 Creating MC Programs

3. Select "H:MC Parameter" from the Flash Memory Menu.
<C200H-MC221>
[Trans/Verify ]
[Flash memory]
A:All data
P:MC program
Write MC parameter
H:MC parameter
OK? (Y/N) N
D:Position data
4. A message will be displayed for confirmation. To write the MC parameter,
input "Y" and press the Return Key.
<C200H-MC221>
[Trans/Verify ]
[Flash memory]
Write MC parameter
OK? (Y/N) Y
MC parameter
This section provides a simple explanation of how to use the MCSS to create an
MC program. For a more detailed explanation, refer to the MC Support Software
Operation Manual.
Online MC parameter
ESC: previous
Online MC parameter
ESC: previous
*** Writing ***
Section 8-12
Frash memory
Flash memory
85