Omron C200H-MC221 Operation Manual page 111

Checking Operation from the MCSS
3. Press the End Key from the MC Monitoring screen to display the Monitoring
Menu.
<C200H-MC221>
P:Display MC programs
S:Display MC I/O status
Note If steps 3 through 5 are executed before the Start Key is pressed, a message will
be displayed at the bottom left of the screen indicating that the program has not
been executed. Monitoring can be carried out if program execution is begun by
pressing the Start key.
4. Select "P:Display MC Programs" from the MC Monitoring Menu.
<CV500-MC221>
[ PV Disply ]
[ MC Monitoring ]
P:Display MC programs
[MC program]
F:Display FAL status
1:Task 1
S:Dioplay MC 1/0 status
2:Task 2
Online
Online
ESC: previous END: menu
<Workpiece Coordinate>
X Axis
Y Axis
<Error Counter>
X Axis
Y Axis
Section 8-17
MC Monitoring
0.00
0.00
0
MC Monitoring
0.00 mm
0.00 mm
0 puls
---1 puls
97