Saving Mc Programs - Omron C200H-MC221 Operation Manual

Saving MC Programs

8-13 Saving MC Programs

Filenames, Directory
Names, and Comments
Example
Floppy Disks
Saving a Program
1, 2, 3...
This section explains how to save an MC program to the data disk once it has
been created.
A filename must be entered when a program is saved. Filenames and directory
names can contain up to eight characters each. Letters of the alphabet are con-
verted to upper case even if they are entered in lower case. The maximum path
length is 78 characters.
C:\MCSS\DATA...\TEST1.MCP
8 characters max.
The maximum number of characters that can be used for a comment is 30.
Floppy disks used as data disks must be initialized and write-enabled. There
must also be sufficient capacity available for the amount of data that is to be
saved.
1. Press the End Key to display the MC Program Edit Menu. Then select
"S:Save Programs."
<C200H-MC221>
C:\MCSS\DATA
8 characters max.
78 characters max.
Program Save
Section 8-13
MC Program Edit
Ln InsMode
87