Omron C200H-MC221 Operation Manual page 27

Features
General-purpose Input
Signals
Manual Pulse Generator
Supported
Interrupt Inching
Starting and stopping can be controlled without the use of the PC. The time re-
quired until a control command voltage is output is shorter than the time neces-
sary to start the Unit by a command from the ladder-diagram program.
Start/stop
High-speed
response
E x t e r n a l
unit
By connecting an MPG (Manual Pulse Generator) to the Y axis, the MPG can be
used for X-axis feeding.
X axis
The MC Unit has an interrupt inching function, thus performing high-precision
inching at high speed with an external input signal.
External input
MC Unit
Start/stop
MC Unit
Speed control Position control
(Inching)
Section 2-1
PC
13