To Set Cruise Control; To Temporarily Cancel The Cruise Control - Subaru Legacy Outback 2006 Owner's Manual

To set cruise control

1. Push the "CRUISE" main switch but-
ton.
The " " indicator light on the com-
bination meter will come on.
2. Depress the accelerator pedal until the
vehicle reaches to the desired speed.
0
300332
3. Push the control lever downward in the
"SET/COAST" direction and release it.
Then release the accelerator pedal.
300210
At this time, the "
luminated in the combination meter.
The vehicle will maintain the desired
speed.
Vehicle speed can be temporarily in-
creased while driving with the cruise con-
trol activated. Simply depress the acceler-
ator pedal to accelerate the vehicle. When
the accelerator pedal is released, the ve-
hicle will return to and maintain the previ-
ous cruising speed.
To temporarily cancel the
cruise control
300333
The cruise control can be temporarily can-
celed in the following ways:
Pull the control lever in the "CANCEL"
300212
direction.
" indicator light is il-
7-39
Starting and operating
700161
– CONTINUED –