To Temporarily Cancel The Cruise Control - Subaru WRX 2021 Owner's Manual

7-54
Starting and operating/Cruise control
nation meter will appear.
2. Depress the accelerator pedal until the
vehicle reaches the desired speed.
3. Press the "RES/SET" switch to the
"SET" side and release it. Then release the
accelerator pedal.
NOTE
Except STI: When setting a cruise
speed for the first time during a drive,
both "SET" and "RES" may be used to
set the initial cruise speed.
Cruise control set indicator
At this time, the cruise control set indicator
appears in the combination meter.
The vehicle will maintain the desired
speed.
You can temporarily increase the vehicle
speed while driving with the cruise control
activated. Simply depress the accelerator
pedal to accelerate the vehicle. When you
release the accelerator pedal, the vehicle
will return to and maintain the previous
cruising speed.
NOTE
For CVT models, when you set the
desired speed while the Sport Sharp
(S#) mode is selected, the select lever/
gear position indicator will change
from the current gear position indica-
tion to the "D" indication.
& To temporarily cancel the
cruise control
You can temporarily cancel the cruise
control in the following ways.
. Press the "CANCEL" button.
. Depress the brake pedal.
. Depress the clutch pedal (MT models
only).
WARNING
For CVT models, you can cancel the
cruise control by shifting the select
lever into the "N" position. However,
do not shift the lever into the "N"
position while driving except in case
of emergency. If the select lever is