Table of Contents
Advertisement
Electronic programmer/timer
This oven's electronic timer is equipped with touch control sensors.
Each registered touch of a sensor field is confirmed by a single beep.
It is advisable to keep the sensor fields clean at all times to avoid
errors in operation.
Setting the current time
After connection to the mains supply, or re-connection after a power
outage, the display will show '12.00' and the clock symbol will flash.
•
Set the current time using the timer left (B) and timer right (D)
sensors. After an approximately 5 second wait, the time will be set.
•
The time can be amended at any time by following these steps.
However, you will firstly need to press the menu sensor (C) until
the display shows the flashing (
Please note: The time must be set for the oven to work.
Setting the minute minder function
The minute minder function can be set at any time, regardless of the
state of activity of the oven. The minute minder can be set anywhere
from 1 minute to 23 hours and 59 minutes.
•
Press the menu sensor until the display shows the flashing (
symbol.
•
Set the desired duration of the minute minder using the timer
left and right sensors. After an approximately 5 second wait, the
minute minder will be set and the (
minute minder duration will be shown on the timer display.
10
) symbol.
) symbol will be solidly lit. The
)
Advertisement
Chapters
Table of Contents
Troubleshooting
