Changing The Oven Light Bulb - CDA HG6001SS Installation, Use And Maintenance Manual

Table of Contents

Changing the oven light bulb

Important:

Before any maintenance is started involving electrical parts, the

appliance must be disconnected from the power supply.

If the oven has been in use, let the oven cavity and the heating

elements cool down before attempting any maintenance.

Never use screwdrivers or other utensils to remove the light cover.

This could damage the enamel of the oven or the lamp holder.

Remove only by hand.

Never replace the bulb with bare hands as contamination from

your fingers can cause premature failure. Always use a clean

cloth or gloves. Old bulbs may also be hot!

Changing the bulb (fig. 10)

•

Unscrew the protective cover.

•

Carefully extract and replace the bulb

with the new one suitable for high

temperatures (300ºC) having the

following specifications: 230-240V,

50Hz, 25W G9 fitting.

•

Refit the protective cover.

Please note:

The bulb replacement is not covered by

your guarantee.

Fig. 10

Table of Contents

Table of Contents