CDA HG6001SS Installation, Use And Maintenance Manual page 42

• There are a number of rubber guides attached to the inner pane
and these must be returned to their original positions when
reassembling the door. Fig. 7 shows these guides and their
position on and around the inner glass.
• Simply reverse these steps in order to reassemble the door. Take
care when reattaching the upper door slat. Place the left side on
first until you hear a 'click' as it connects and then attach the right
side. This will help to avoid damaging the door and/or glass.
Upper glass
guides (both
sides)
Fig. 7
Important: Do not disassemble the door without it having been
removed from the oven. Weight differences could cause the door
to snap shut, causing damage to the oven and/or the user.
18
2
1
3
2
1
3
3
2
1
Lower glass
guides (both
sides)