Timer/Minute Minder - CDA HC9621FR Installation, Use And Maintenance Manual

Table of Contents

Advertisement

Zone Power Level
Maximum
Operating Time
(minutes)
Please note: The auto-heat function is not compatible with heat
setting 9.
If a power level (between 1 and 8) is not selected within 10 seconds of
preparing the auto-heat function, then the function will be deactivated.

Timer/Minute minder

The hob is equipped with a timer that allows a finish time to be set for
the end of cooking on any zone, between a minimum of 1 minute and
a maximum of 99 minutes. This timer can only be used on one zone
at a time. Once the timer is set, the timer display will show the time
remaining. In normal use, the timer ending prompts the zone heating
to end as well. However the timer can also be used as a minute
minder to count down time without halting heating.
Please note: Setting the number of minutes on the timer display
before a zone power level has been set will activate the minute
minder and not the timer function. It is important, if you wish to activate
the timer function, that you press the timer '+' sensor only once before
setting a power level on the desired zone.
1
2
3
4
5
1.11
2.44 4.47 5.28 6.29 1.11
6
7
8
9
2.44 2.44
- -
11

Advertisement

Table of Contents
loading

Table of Contents