Timer/Minute Minder - CDA HNE8FR Installation, Use And Maintenance Manual

Timer/Minute minder

The hob is equipped with a timer that allows a finish time to be set for
the end of cooking on any zone, between a minimum of 1 minute and
a maximum of 119 minutes. This timer can be used separately for
each zone, and the timer activity indicator (3) will illuminate faintly
on each zone for which it is set and remain brightest on the first
zone to end. Once the timers are set, the timer display will show the
time remaining on the first zone to finish cooking. In normal use, the
timer ending prompts the zone heating to end as well. However the
timer can also be used as a minute minder to count down time without
halting heating.
Please note: At the end of the timer, the selected zone will switch off
and the timer indicators will flash. The hob will beep for approximately
two minutes. To switch off the beep, touch the timer minus and plus
setting sensors (5 & 7) simultaneously. This beeping also occurs after
the minute minder time has elapsed and the same process to switch
off the beep applies.
If no time is set within 5 seconds of activating the timer, then it will
deactivate automatically.
To set the timer
• First switch on the hob if necessary and set the desired zone to the
power level required.
• Touch the timer minus setting sensor (5) and the timer plus setting
sensor (7) simultaneously. The timer display (6) will illuminate.
• A clock symbol (the timer activity indicator) will appear next to the
power level of the leftmost active zone. This clock indicates which
13