Removing The Inner Door Glass - CDA HG6001SS Installation, Use And Maintenance Manual

Removing the inner door glass

With the door removed, the inner
glass can also be taken out for
cleaning purposes.
• Use a flathead screwdriver or to
unhook the door slat, as shown in
fig. 5
• Remove the door slat, as per fig.
6, and place it somewhere safe
where it will neither receive nor
cause damage.
• Remove the inner glass from
the blocks it is seated within
(near to the hinges) and place
this somewhere safe also. Pay
attention to the way that the glass
is facing as it will need to be
replaced in the same direction.
The smooth surface of the
glass should be facing upwards
(inwards if the door was back in
place) with the patterned side
facing the oven door handle.
• Clean the door glass with warm,
soapy water and wipe dry with a
clean microfibre cloth.
• The middle pane of glass can also be removed but it is important
that this pane is reinserted facing the same way that it was when
removed.
Fig. 5
Fig. 6
17