Timer/Minute Minder - CDA HN6731FR Installation, Use And Maintenance Manual

Table of Contents

Advertisement

Operating time limiter durations
Zone Heat Setting
Maximum
Operating Time
(minutes)

Timer/Minute Minder

The hob is equipped with a timer that allows a finish time to be set
for the end of cooking on any zone, between a minimum of 1 minute
and a maximum of 99 minutes. This timer can be used separately for
each zone, and an LED will indicate the zone positions for each of
the active timers. Once the timers are set, the timer display will show
the time remaining on the first zone to finish cooking. In normal use,
the timer ending prompts the zone heating to end as well. However
the timer can also be used as a minute minder to count down time
without halting heating.
Please note: At the end of the timer, the selected zone will switch off
and the timer indicators, and relevant timed zone LED, will flash. The
hob will beep for approximately two minutes. To switch off the beep
and the flashing display, touch any key. This beeping also occurs after
the minute minder time has elapsed and the same process to switch
off the beep applies.
3
1
2
4
5
360
360 250 250 200 90
8
9
6
7
P
90
90
90
10
11

Advertisement

Table of Contents
loading

Table of Contents