Table of Contents
Advertisement
Timer/Minute Minder
The hob is equipped with a timer that allows a finish time to be set for
the end of cooking on any zone, between 1 minute and 99 minutes.
Once the timer is set, the timer display will show the time remaining.
In normal use, the timer ending prompts the zone heating to end as
well. However the timer can also be used as a minute minder to count
down time without halting heating.
Please note: Setting the number of minutes on the timer display
before a zone power level has been set will activate the minute
minder and not the timer function.
To set the timer
•
Set the zone that you would like to be timed to the desired
power level. Touch the timer sensor the required number of times
until the relevant zone's LED is flashing. These LEDs are set out
in a similar manner to the zones:
Central left zone LED
Left zone LED
•
Set the number of minutes using the power level slider (4). The
slider should be used with a swiping motion from left to right using
the complete fingertip. When you have reached the edge of the
slider, lift your finger and start again from left to right. You can also
Central right zone LED
Right zone LED
11
Advertisement
Table of Contents
