CDA HG6001SS Installation, Use And Maintenance Manual page 37

• The cooking time will be set after approximately 5 seconds. The
display will revert to showing the current time and the (
will be illuminated.
• Press the menu sensor (C) until the display illuminates the 'A'
symbol. The timer display will show the current time + cooking
duration.
• Set the end of cooking time using the timer left (B) and right (D)
sensors.
The end of cooking time can be set no more than 23 hours and 59
minutes ahead of the current time.
• Set the desired function and temperature using the relevant
control knobs. The automatic function will now be set. Once the
end of cooking time has been reached an acoustic signal will
sound and the 'A' symbol will flash. To deactivate the acoustic
signal, press any of the three timer sensors. Alternatively, the
signal will deactivate automatically after approximately 2 minutes.
• Switch both control knobs to the off position.
To cancel automatic cooking
The semi-automatic function can be cancelled at any time. To do this,
simply press the menu sensor (C) until the display shows the (
symbol and use the timer left sensor (B) to return the timer display to
0.00.
Please note: It is not possible to adjust the time (of day) setting whilst
the semi-automatic and automatic cooking functions are operational.
) symbol
)
13