Removing The Shelf Supports - CDA HG6001SS Installation, Use And Maintenance Manual

Removing the shelf supports

Important:
Always remember to allow the oven to cool sufficiently, if it has
been in use, before carrying out any maintenance.
To remove the shelf supports
• Take a firm hold of the shelf
support in the middle. Place
your thumb against the oven
wall and lever the support
out of the support holes
(Fig. 8)
• Tilt the shelf support
outwards (Fig. 9) and you
should then be able to
remove the shelf support
arms that secure it into the
cavity walls at the back.
To replace the shelf supports
• Simply carry out the above
steps, but in reverse order.
Please note:
Take care not to damage the enamel walls of the oven, particularly
around the shelf support arm holes.
Fig. 8
Fig. 9
19