CDA HG6001SS Installation, Use And Maintenance Manual page 8

appears around the burner, keep the control knob pressed down
for a few seconds to allow the flame failure device to detect the
presence of the flame.
Once lit, release the control knob and turn it to the desired position
i.e. until the burner flame is at the required intensity.
Once you have finished cooking with the burner(s) in use, return the
control knobs to the closed (off) position.
Please note:
The ignition should not be operated (clicking constantly) for more
than 15 seconds at a time.
If a burner does not ignite, or turns off accidentally, turn the control
knob to the closed (off) position. Wait for one minute before attempting
to reignite the burner. The flame failure device will activate within
approximately 60 seconds.
If the burner does not ignite, repeat the ignition process with the
control knob at the minimum position.
If a burner continues to not ignite, please follow the troubleshooting
section on page 11. If the burner has been in use recently, allow it to
cool sufficiently before handling it.
8