VRRP Virtual Router Settings
The following window will allow the user to view the parameters for the VRRP function on the
Switch. To view this window, click Layer 3 Features > VRRP > VRRP Virtual Router Settings:
The following fields are displayed in the window above:
Parameter
VRID / Interface
Name
Virtual IP Address
Master IP Address
Virtual Router State
State
Display
Delete
Click the Add button to display the following window to configure a VRRP interface.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 8- 46. VRRP Virtual Router Settings window
Description
VRID - Displays the virtual router ID set by the user. This will uniquely identify the
VRRP Interface on the network.
Interface Name - An IP interface name that has been enabled for VRRP. This entry
must have been previously set in the IP Interfaces table.
The IP address of the Virtual router configured on the Switch.
Displays the IP address of the Master router for the VRRP function.
Displays the current state of the Virtual Router on the Switch. Possible states include
Initialize, Master and Backup.
Displays the VRRP state of the corresponding VRRP entry.
Click the
button to display the settings for this particular VRRP entry.
Click the
to delete this VRRP entry.
148