Installation; Package Contents; Before You Connect To The Network - D-Link xStack DES-3800 Series User Manual

Installation

Package Contents

Before You Connect to the Network

Installing the Switch Without the Rack
Rack Installation
Power On
Connecting DC Power to DES-3828DC
RPS Installation
Package Contents
Open the shipping carton of the Switch and carefully unpack its contents. The carton should contain
the following items:
One Stand-alone Switch
•
One AC power cord (excluding DES-3828DC)
•
This Manual on CD
•
Mounting kit (two brackets and screws)
•
Four rubber feet with adhesive backing
•
RS-232 console cable
•
If any item is found missing or damaged, please contact your local D-Link Reseller for replacement.
Before You Connect to the Network
The site where you install the Switch may greatly affect its performance. Please follow these
guidelines for setting up the Switch.
Install the Switch on a sturdy, level surface that can support at least 4.24kg (9.35lbs) of
•
weight for DES-3828/DES-3828DC, or 6.02kg (13.27lbs) for DES-3828P. Do not place
heavy objects on the Switch.
The power outlet should be within 1.82 meters (6 feet) of the Switch.
•
Visually inspect the power cord and see that it is fully secured to the AC/DC power port.
•
Make sure that there is proper heat dissipation from and adequate ventilation around the
•
Switch. Leave at least 10 cm (4 inches) of space at the front and rear of the Switch for
ventilation.
Install the Switch in a fairly cool and dry place for the acceptable temperature and humidity
•
operating ranges.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
SECTION 2
8