Vrrp Virtual Router Settings - D-Link xStack DES-6500 User Manual

VRRP Virtual Router Settings

The following window will allow the user to view the parameters for the VRRP function on the Switch. To view this
window, click Configuration > Layer 3 IP Networking > VRRP > VRRP Virtual Router Settings:
The following fields are displayed in the window above:
Parameter
VRID
Interface Name
Authentication Type
Display
Delete
Click the Add button to display the following window to configure a VRRP interface.
xStack DES-6500 Modular Layer 3 Chassis Ethernet Switch User Manual
Figure 6- 160. VRRP Virtual Router Settings window
Description
VRID - Displays the virtual router ID set by the user. This will uniquely identify the
VRRP Interface on the network.
An IP interface name that has been enabled for VRRP. This entry must have been
previously set in the IP Interfaces table.
Displays the Authentication in use on this Virtual Interface. Possible authentication
types include:
No authentication - No authentication has been selected to compare VRRP
•
packets received by a virtual router.
Simple Text Password - A Simple password has been selected to compare
•
VRRP packets received by a virtual router, for authentication.
IP Authentication Header - An MD5 message digest algorithm has been
•
selected to compare VRRP packets received by a virtual router, for
authentication.
Click the button to display the settings for this particular VRRP entry.
Click the to delete this VRRP entry.
Figure 6- 161. VRRP Virtual Router Settings – Add window
180