Forwarding
Unicast Forwarding
Open the Forwarding folder in the Layer 2 Features menu and click on the Unicast Forwarding
link.
To add or edit an entry, define the following parameters and then click Add/Modify:
Parameter
VLAN ID (VID)
MAC Address
Click Apply to implement the changes made. To delete an entry in the Static Unicast Forwarding
Table, click the corresponding X under the Delete heading.
Static Multicast Forwarding
The following figure and table describe how to set up Multicast Forwarding on the Switch. Open the
Forwarding Filtering folder and click on the Multicast Forwarding link to see the entry screen
below:
The Static Multicast Forwarding Settings window displays all of the entries made into the Switch's
static multicast forwarding table. Click the Add button to open the Setup Static Multicast For-
warding Table window, as shown below:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 7- 31. Setup Static Unicast Forwarding Table window
Description
The VLAN ID number of the VLAN on which the above Unicast MAC address
resides.
The MAC address to which packets will be statically forwarded. This must be a
unicast MAC address.
Figure 7- 32. Static Multicast Forwarding Settings window
101