Ssh Authentication Mode And Algorithm Settings - D-Link xStack DES-3800 Series User Manual

Time Out (120-600)
Auth. Fail (2-20)
Session Rekeying

SSH Authentication Mode and Algorithm Settings

The SSH Algorithm window allows the configuration of the desired types of SSH algorithms used for
authentication encryption. There are four categories of algorithms listed and specific algorithms of
each may be enabled or disabled by using their corresponding pull-down menus. All algorithms are
enabled by default. To open the following window, click Security > SSH > SSH Authentication
Mode and Algorithm Settings:
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Allows the user to set the connection timeout. The use may set a time between 120 and
600 seconds. The default setting is 300 seconds.
Allows the Administrator to set the maximum number of attempts that a user may try to
log on to the SSH Server utilizing the SSH authentication. After the maximum number of
attempts has been exceeded, the Switch will be disconnected and the user must
reconnect to the Switch to attempt another login. The number of maximum attempts
may be set between 2 and 20. The default setting is 2.
Using the pull-down menu uses this field to set the time period that the Switch will
change the security shell encryptions. The available options are Never, 10 min, 30 min,
and 60 min. The default setting is Never.
231