Browse Router Port; Port Access Control; Radius Authentication - D-Link xStack DES-3800 Series User Manual

Clear
View Table
View Line Chart

Browse Router Port

This displays which of the Switch's ports are currently configured as router ports. A router port
configured by a user (using the console or Web-based management interfaces) is displayed as a static
router port, designated by S. D designates a router port that is dynamically configured by the Switch.
To view the following window, open the Monitoring folder and click the Browse Router Port link.

Port Access Control

The following screens are used to monitor 802.1x statistics of the Switch, on a per port basis. To view
the Port Access Control screens, open the monitoring folder and click the Port Access Control
folder. There are six screens to monitor.

RADIUS Authentication

This table contains information concerning the activity of the RADIUS authentication client on the
client side of the RADIUS authentication protocol. It has one row for each RADIUS authentication
server that the client shares a secret with. To view the RADIUS Authentication, click Monitoring >
Port Access Control > RADIUS Authentication.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Clicking this button instructs the Switch to display a line graph rather than a table.
Figure 12- 15. Router Port window
NOTE: The Authenticator State cannot be viewed on the
Switch unless 802.1x is enabled by port or by MAC address.
To enable 802.1x, go to the DES-3828P Web Management
Tool menu.
254