To configure a mirror port:
1. Select the Source Port from where you want to copy frames and the Target Port, which
receives the copies from the source port.
2. Select the Source Direction, Ingress, Egress, or Both and change the Status drop-down menu to
Enabled.
3. Click Apply to let the changes take effect.
System Log Host
The Switch can send Syslog messages to up to four designated servers using the System Log Server.
In the Administration folder, click System Log Host, to view the window shown below.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 6- 9. Setup Port Mirroring window
Figure 6- 10. System Log Servers window
43