xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
delete button next to the entry's MAC address. To delete all the entries in the IP-MAC Binding
Blocked Table click Delete All.
ARP Storm Control
ARP Storm Control is used to protect the CPU filtering mechanism from ARP broadcast storms. ARP
packets being sent to the CPU filtering mechanism can be limited by setting the ARP Storm Control
Threshold. The threshold determines the allowable number of ARP packets (measured in Kbytes per
second) that the CPU filtering mechanism can process. If an ARP broadcast storm occurs, and the
ARP Storm Control Threshold is exceeded, the Switch will drop the packet. The threshold must be a
multiple of 8 between 8 and 1024. To view the ARP Storm Control Settings window, click Security >
ARP Storm Control.
Figure 11- 41. ARP Storm Control window
To set the ARP Storm Control Threshold, enter a multiple of 8 between 8 and 1024 in the threshold
field, select Enabled from the ARP Storm Control Threshold State drop down menu, and click
Apply.
238