Transmitted (Tx) - D-Link xStack DES-3800 Series User Manual

Figure 12- 7. Rx Packets Analysis window (table for Unicast, Multicast, and Broadcast Packets)
The following fields may be set or viewed:
Parameter
Time Interval
Record Number
Unicast
Multicast
Broadcast
Show/Hide
Clear
View Table
View Line Chart

Transmitted (TX)

Click the Transmitted (TX) link in the Packets folder of the Monitoring menu to view the following
graph of packets transmitted from the Switch.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Description
Select the desired setting between 1s and 60s, where "s" stands for seconds. The
default value is one second.
Select number of times the Switch will be polled between 20 and 200. The default
value is 20.
Counts the total number of good packets that were received by a unicast address.
Counts the total number of good packets that were received by a multicast address.
Counts the total number of good packets that were received by a broadcast address.
Check whether or not to display Multicast, Broadcast, and Unicast Packets.
Clicking this button clears all statistics counters on this window.
Clicking this button instructs the Switch to display a table rather than a line graph.
Clicking this button instructs the Switch to display a line graph rather than a table.
245