Acl; Access Profile Table - D-Link xStack DES-3800 Series User Manual

ACL

Access Profile Table

CPU Interface Filtering
Access profiles allow you to establish criteria to determine whether or not the Switch will forward
packets based on the information contained in each packet's header. These criteria can be specified on
a basis of VLAN, MAC address, or IP address.
Access Profile Table
Creating an access profile is divided into two basic parts. The first is to specify which part or parts of a
frame the Switch will examine, such as the MAC source address or the IP destination address. The
second part is entering the criteria the Switch will use to determine what to do with the frame. The
entire process is described below in two parts. To display the currently configured Access Profiles on
the Switch, open the ACL folder and click the Access Profile Table link. This will open the Access
Profile Table page, as shown below.
To add an entry to the Access Profile Table, click the Add profile button. This will open the Access
Profile Configuration page, as shown below. There are three Access Profile Configuration pages;
one for Ethernet (or MAC address-based) profile configuration, one for IP address-based profile con-
figuration, and one for the Packet Content Mask. You can switch between the three Access Profile
Configuration pages by using the Type drop-down menu. The page shown below is the Ethernet
Access Profile Configuration page.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 10- 1. Access Profile Table
Section 10
168