Front-Panel Components - D-Link xStack DES-3800 Series User Manual

IEEE 802.3x Flow Control support for Full-Duplex mode.
•
The Switch provides 2 1000 Base-T/SFP combo ports on the front panel. Both 1000BASE-T ports
comply with the following standards:
IEEE 802.3
•
IEEE 802.3u
•
IEEE 802.3ab
•
Support Full-Duplex operations
•
IEEE 802.3x Flow Control support for Full-Duplex mode
•
IEEE 802.3z
•
Both SFP ports support the following transeivers:
DEM-310GT (1000BASE-LX)
•
DEM-311GT (1000BASE-SX)
•
DEM-314GT (1000BASE-LH)
•
DEM-315GT (1000BASE-ZX)
•
Th Switch provides 2 1000 Base-T ports on the rear panel. Both 1000BASE-T ports comply with the
following standards:
IEEE 802.3
•
IEEE 802.3u
•
IEEE 802.3ab
•
Support Full-Duplex operations
•
IEEE 802.3x Flow Control support for Full-Duplex mode
•

Front-Panel Components

The front panel of the Switch provides 24 10/100BASE-TX ports, 2 1000 Base-T/SFP combo ports,
and an RS-232 console port. DES-3828P also includes a Mode Select button for changing the mode
Link/Act/State to PoE.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
NOTE: On DES-3828P, all 24 10/100BASE-TX ports also comply
with the IEEE 802.3af standard.
NOTE: The SFP combo ports on the Switch cannot be used
simultaneously with the corresponding 1000BASE-T ports. If
both ports are in use at the same time (ex. port 25 of the SFP
and port 25 of the 1000BASE-T), the SFP ports will take
priority over the combo ports and render the 1000BASE-T
ports inoperable.
2