Stp Instance Settings - D-Link xStack DES-3800 Series User Manual

Priority
Click Apply to implement changes made.

STP Instance Settings

The following window displays MSTIs currently set on the Switch. To view the following table, click
Layer 2 Features > Spanning Tree > STP Instance Settings:
The following information is displayed:
Parameter Description
Instance Type
Instance Status
Instance Priority
Click Apply to implement changes made.
Click the Modify button to change the priority of the MSTI. This will open the Instance ID Settings
window to configure.
Parameter Description
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Enter a value between 0 and 240 to set the priority for the port interface. A higher
priority will designate the interface to forward packets first. A lower number denotes a
higher priority.
Figure 7- 27. STP Instance Table window
Displays the instance type(s) currently configured on the Switch. Each instance type
is classified by a MSTI ID. CIST refers to the default MSTI configuration set on the
Switch.
Displays the current status of the corresponding MSTI ID
Displays the priority of the corresponding MSTI ID. The lowest priority will be the root
bridge.
Figure 7- 28. STP Instance Settings Modify window
96