Static Arp Table - D-Link xStack DES-3800 Series User Manual

The following fields can be set:
Parameter
IP Address
Subnet Mask
Gateway IP
Metric (1-65535)
Backup State
Click Apply to implement changes made.

Static ARP Table

The Address Resolution Protocol (ARP) is a TCP/IP protocol that converts IP addresses into physical
addresses. This table allows network managers to view, define, modify and delete ARP information
for specific devices. Static entries can be defined in the ARP Table. When static entries are defined, a
permanent entry is entered and is used to translate IP address to MAC addresses.
To open the Static ARP Table open the Layer 3 Features folder and click on the Static ARP
Settings link.
xStack DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch
Figure 8- 7. Static/Default Route Settings – Add window
Description
Allows the entry of an IP address that will be a static entry into the Switch's Routing
Table.
Allows the entry of a subnet mask corresponding to the IP address above.
Allows the entry of an IP address of a gateway for the IP address above.
Allows the entry of a routing protocol metric representing the number of routers
between the Switch and the IP address above.
The user may choose between Primary and Backup. If the Primary Static/Default
Route fails, the Backup Route will support the entry. Please take note that the
Primary and Backup entries cannot have the same Gateway.
109