Table 5-31. Static Ip Settings - For Ip Over Ethernet Menu Options - ADTRAN Total Access 1240 Installation And Maintenance Practice

Table 5-31. Static IP Settings - for IP over Ethernet Menu Options

Option Description
1 IP address
2 Subnet mask
3 Default Gateway
4 TFTP IP address
5 Reset IP Factory Defaults
6 IP VLAN ID
61179605L5-5B
Section 5, User Interface - Menu Descriptions
Function
This options is used to configure the IP address in
decimal dot format (i.e., ###.###.###.###).
This option is used to configure the Subnet Mask in
decimal dot format.
This option is used to configure the Default Gateway.
The Default Gateway is used to forward traffic to a
destination outside of the subnet of the Total Access
1240. The Default Gateway is configured in decimal dot
format.
This option is used to configure the TFTP IP address.
The TFTP IP address must be configured to use TFTP for
software upgrade. The TFTP address is configured in
decimal dot format.
This option displays the
Menu" on page 5-42.
This option is used to set the IP VLAN ID.
The IP VLAN ID must be set between 1 and 4094.
Choosing 1 indicates an untagged VLAN ID. Choosing
between 2 and 4094 indicates a tagged VLAN ID.
"Restore IP Factory Defaults
5-41