Static Ip Settings - For Ip Over Ethernet Menu; Figure 5-27. Static Ip Settings - For Ip Over Ethernet Menu - ADTRAN Total Access 1240 Installation And Maintenance Practice

Total Access 1240 Installation and Maintenance Practice
Table 5-30. Mode Selection and Current IP Settings Menu Options (Continued)
Option Description
3 Configure IP

Static IP Settings - for IP over Ethernet Menu

The Static IP Settings - for IP over Ethernet menu (see
provision all of the IP settings.
Unacknowledged Alarms: None

Figure 5-27. Static IP Settings - for IP Over Ethernet Menu

The Media Access Control (MAC) address, which is set at the
factory, is required to configure the DHCP server.
The Static IP Settings - for IP over Ethernet menu options are shown in
5-40
Function
Depending on the setting of the Mode option, the
Configure IP option displays one of the following menus:
• "Static IP Settings - for IP over Ethernet Menu"
page 5-40
• "Dynamic IP Settings - for IP over Ethernet Menu"
on page 5-43
Figure
Total Access 1240 - IPoE Fed
Static IP Settings - for IP over Ethernet
1. IP address
2. Subnet mask
3. Default Gateway
4. TFTP IP address
5. Reset IP Factory Defaults
6. IP VLAN ID
(Vlan = 1 is untagged / 2-4094 is tagged)
MAC Address
Selection :
'?' - System Help Screen
NOTE
5-27) is used to manually
192.168.1.1
255.255.255.0
192.168.1.254
10.200.200.218
1
00-a0-c8-12-4c-7c
Table 5-31.
61179605L5-5B
on