SHDSL Loop 1 Interface Mode Menu
The SHDSL Loop 1 Interface Mode menu (see
The interface mode can be set to either 2-wire or 4-wire. SHDSL transceivers are designed
primarily for duplex operation over mixed gauge 2-wire twisted metallic pairs, however,
optional 4-wire operation is supported for extended reach applications.
Figure 5-53. SHDSL Loop 1 Interface Mode Menu
The SHDSL Loop 1 Interface Mode menu options are shown in
Table 5-53. SHDSL Loop 1 Interface Mode Menu Options
Option
Description
1
2-wire
2
4-wire
The line rate on both pairs must be the same.
61179605L5-5B
Figure
5-53) is used to set the interface mode.
Total Access 1240
SHDSL Loop 1 Interface Mode
1.
2-wire
2.
4-wire
Selection:
'?' - System Help
Function
This option sets the interface mode to s
operation. SHDSL offers rates from 192 kbps to 2.3
Mbps in increments of 64 kbps.
This option sets the interface mode to
operation. SHDSL offers rates from 384 kbps to 4.6
Mbps in increments of 64 kbps.
NOTE
Section 5, User Interface - Menu Descriptions
09/01/05
03:59
Table
5-53.
ingle-pair
dual-pair
5-73