Mid-Mount; Figure 3-3. Mid-Mount Orientation - ADTRAN Total Access 1240 Installation And Maintenance Practice

Section 3, Installation - Mounting the Total Access 1240

Mid-mount

For mid-mount systems, the Total Access 1240 must be mounted from the front of the rack,
with mounting brackets in the mid-mounting orientation (see Figure 3-3). For mid-mounting
a Total Access 1240 in the rack, use a #2 phillips-head screwdriver and attach the mounting
brackets to the rear set of threaded screw holes with the flanges containing the slotted rack-
mounting holes facing the front of the Total Access 1240.
Using four screws appropriate for the mounting rack and the appropriate screwdriver, secure
the Total Access 1240 in place on the rack.
Mid-mount Orientation
P/N 3265540-1
19-inch Mounting Brackets
P/N 3265540-2
23-inch Mounting Brackets

Figure 3-3. Mid-mount Orientation

61179605L5-5B 3-5