Snmp Trap Hosts Menu; Figure 5-38. Snmp Trap Hosts Menu; Table 5-40. Snmp Trap Hosts Menu Options - ADTRAN Total Access 1240 Installation And Maintenance Practice

SNMP Trap Hosts Menu

The SNMP Trap Hosts menu (see
nations) and SNMP versions for notification of a trap. A trap is an automatic alert, or notifi-
cation, sent to an IP Address. The Total Access 1240 system forwards SNMP traps to all
configured hosts as the traps occur.
Unacknowledged Alarms: None
Set IP address to enter Trap Host. Set IP address to D to delete Trap Host
1. IP Address
2. Version
3. IP Address
4. Version
5. IP Address
6. Version
7. Trap Port
The SNMP Trap Hosts menu options are shown in
Option Description
1 IP Address
2 Version
3 IP Address
61179605L5-5B
Figure 5-38) is used to set multiple IP Addresses (trap desti-
Total Access 1240 - IPoE Fed
SNMP Trap Hosts
0.0.0.0
SNMPv1
0.0.0.0
SNMPv1
10.200.200.218
SNMPv2
162
Selection :
'?' - System Help Screen

Figure 5-38. SNMP Trap Hosts Menu

Table 5-40. SNMP Trap Hosts Menu Options

Function
This option is used to configure the first SNMP trap host
IP address in decimal dot format (i.e., ###.###.###.###).
This option is used to configure the SNMP version for the
first SNMP trap host.
Options include the following:
This option is used to configure the second SNMP trap
host IP address in decimal dot format (i.e.,
###.###.###.###).
Section 5, User Interface - Menu Descriptions
Table 5-40.
• SNMPv1
• SNMPv2
5-55