Table of Contents
Advertisement
SNMP Community Names Menu
The SNMP Community Names menu (see
accounts which specify unique IP addresses and privileges for network management. To
restrict SNMP remote access to a single IP address, assign the IP address to a community. An
IP address of 0.0.0.0 provides access from all IP addresses.
Unacknowledged Alarms: None
1. Name
2. IP Address
3. Privileges
4. Name
5. IP Address
6. Privileges
7. Name
8. IP Address
9. Privileges
The SNMP Community Names menu options are shown in
Table 5-39. SNMP Community Names Menu Options
Option
Description
1
Name
2
IP Address
3
Privileges
4
Name
5
IP Address
61179605L5-5B
Figure
Total Access 1240 - IPoE Fed
SNMP Community Names
Set Name to 0 to delete Community
private
0.0.0.0
Read
public
0.0.0.0
Read/Write
Not Configured
0.0.0.0
Selection :
'?' - System Help Screen
Figure 5-37. SNMP Community Names Menu
Function
This option is used to configure the first SNMP
community. Settings include Private and Public.
This option is used to configure the first SNMP
community IP address in decimal dot format (i.e.,
###.###.###.###).
This option is used to configure the first SNMP
community privilege level. Options include Read/Write
and Read.
This option is used to configure the second SNMP
community. Settings include Private and Public.
This option is used to configure the second SNMP
community IP address in decimal dot format (i.e.,
###.###.###.###).
Section 5, User Interface - Menu Descriptions
5-37) is used to establish up to three named
Table
5-39.
5-53
Advertisement
Table of Contents
