Dynamic Ip Settings - For Ip Over Ethernet Menu; Figure 5-29. Dynamic Ip Settings - For Ip Over Ethernet Menu; Table 5-32. Dynamic Ip Settings - For Ip Over Ethernet Menu Options - ADTRAN Total Access 1240 Installation And Maintenance Practice

Dynamic IP Settings - for IP over Ethernet Menu

The Dynamic IP Settings - for IP over Ethernet menu (see
some of the IP settings. When the Mode option is set to Dynamic, the Total Access 1240
system automatically retrieves the IP address, Subnet mask, and Default Gateway from the
remote DHCP server. The remaining menu items can be provisioned manually.
Unacknowledged Alarms: None

Figure 5-29. Dynamic IP Settings - for IP over Ethernet Menu

The Dynamic IP Settings - for IP over Ethernet menu options are shown in

Table 5-32. Dynamic IP Settings - for IP over Ethernet Menu Options

Option Description
1 TFTP IP address
2 Renew DHCP Lease
3 Reset IP Factory Defaults
4 IP VLAN ID
61179605L5-5B
Total Access 1240 - IPoE Fed
Dynamic IP Settings - for IP over Ethernet
1. TFTP IP address
2. Renew DHCP Lease
3. Reset IP Factory Defaults
4. IP VLAN ID
(Vlan = 1 is untagged / 2-4094 is tagged)
Selection :
'?' - System Help Screen
Function
This option is used to configure the TFTP IP address.
The TFTP IP address must be configured to use TFTP for
software upgrade. The TFTP address is configured in
decimal dot format.
This option is used to manually renew information from
the DHCP server.
This option displays the
Menu" on page 5-44.
This option is used to configure the IP VLAN ID.
The IP VLAN ID must be set between 1 and 4094.
Choosing 1 indicates an untagged VLAN ID. Choosing
between 2 and 4094 indicates a tagged VLAN ID.
Section 5, User Interface - Menu Descriptions
Figure 5-29) is used to provision
10.200.200.218
1
Table
"Restore IP Factory Defaults
5-32.
5-43