Flush-Mount; Figure 3-2. Flush-Mount Orientation - ADTRAN Total Access 1240 Installation And Maintenance Practice

Total Access 1240 Installation and Maintenance Practice

Flush-mount

For flush-mount systems, the Total Access 1240 must be mounted from the front of the rack,
with mounting brackets in the flush-mounting orientation (see Figure 3-2). When flush-
mounting a Total Access 1240 in the rack, use a #2 phillips-head screwdriver and attach the
mounting brackets to the front set of threaded screw holes with the flanges containing the
slotted rack-mounting holes facing the front of the Total Access 1240.
Using four screws appropriate for the mounting rack and the appropriate screwdriver, secure
the Total Access 1240 in place on the rack.
Flush-mount Orientation
P/N 3265540-1
19-inch Mounting Brackets
P/N 3265540-2
23-inch Mounting Brackets

Figure 3-2. Flush-mount Orientation

3-4 61179605L5-5B