Table of Contents
Advertisement
Restore Factory Defaults Menu
The Restore Factory Defaults menu (see
defaults of the system.
This action is service affecting. If the system is accessed remotely
through a static IP address, the system resets and access is lost.
Unacknowledged Alarms: None
The Restore Factory Defaults menu options are shown in
Table 5-45. Restore Factory Defaults Menu Options
Option
Description
1
Restore
2
Exit
61179605L5-5B
Figure
CAUTION
Total Access 1240 - IPoE Fed
Restore Factory Defaults
WARNING! THIS IS SERVICE AFFECTING!
This defaults all TA1240 options EXCEPT Management IP Settings
and the unit will be restarted upon completion.
The restore operation may take several minutes.
1. Restore
2. Exit
Selection :
'?' - System Help Screen
Figure 5-44. Restore Factory Defaults Menu
Function
This option is used to restore all SNMP settings to the
factory default settings.
This option is used to return to the
Management Menu"
are not restored.
Section 5, User Interface - Menu Descriptions
5-44) is used to remotely restore the factory
09/01/05
Table
5-45.
on page 5-34. The factory defaults
01:25
"System
5-63
Advertisement
Table of Contents
