Table of Contents
Advertisement
Total Access 1240 Installation and Maintenance Practice
Duplex Mode Menu
The Duplex Mode menu (see
interface.
Unacknowledged Alarms: None
The duplex mode displayed in the title indicates the current duplex
mode being viewed or provisioned.
The Duplex Mode menu options are shown in
Option
Description
1
Auto Negotiate
2
Full Duplex
3
Half Duplex
5-24
Figure
5-17) is used to select the duplex mode of the Ethernet
Total Access 1240 - IPoE Fed
Duplex Mode
1. Auto Negotiate
2. Full Duplex
3. Half Duplex
Selection :
'?' - System Help Screen
Figure 5-17. Duplex Mode Menu
NOTE
Table 5-14. Duplex Mode Menu Options
Function
This option sets the system to automatically detect the
duplex mode of the attached device.
This option sets the Ethernet interface to transmit and
receive simultaneously.
This option sets the Ethernet interface to transmit or
receive at a given time, but not simultaneously.
-
Full Duplex
Table
5-14.
09/01/05
03:44
61179605L5-5B
Advertisement
Table of Contents
