Data Over Voice; Call Routing; Enable Distinctive Ringing; Protocols Tab - ADTRAN 3000 User Manual

Chapter 3. Using the Express Configuration Program

Data Over Voice

Allows data calls to be placed using a Speech Call Type. If a usage
charge for data exists in your area, you may benefit from this
option.

Call Routing

Specifies how the Express 3000 routes incoming voice calls. Op-
tions include the following:
All Calls to DTE
Speech Calls to
POTS
Speech/Audio Calls
to POTS

Enable Distinctive Ringing

Instructs the Express 3000 to use distinctive rings that are easily
recognized on POTS ports 1 and 2.

Protocols Tab

The Protocols Tab provides you with fields for defining the point-to-
point protocol (PPP) type. Options include the following:

Enable AO/DI

Configures the unit to operate in AO/DI mode when placing PPP
calls. AO/DI allows the unit to place X.25 packet calls over the
D channel. This feature requires that X.25 packet service be pur-
chased from your ISDN service provider and AO/DI service be
purchased from you Internet Service Provider.

Raise Threshold

Defines the percentage of available bandwidth that must be in use
before an additional channel is added. A very high Raise Thresh-
old sends the most packets on the D or, initial, B channel, before
adding more B channels. A very low Raise Threshold sends a min-
imum number of packets on the initial channel. Raise Threshold
3-14
Routes all calls to the EIA-232 port, regardless of
Call Type.
Routes calls with a Speech call type to the POTS
ports. Calls with Data 56k, Data 64k, and Audio
are routed to the EIA-232 port.
Routes calls with Speech and Audio call types to
the POTS ports. Calls with Data 56k and Data
64k are routed with the EIA-232 port.
Express 3000 User Manual 61203153L2-20