Logging On To The Total Access 1240; Figure 5-2. Login Screen - ADTRAN Total Access 1240 Installation And Maintenance Practice

LOGGING ON TO THE TOTAL ACCESS 1240

To login to the Total Access 1240 system, perform the following steps:
1. Establish the physical connection to the Total Access 1240.
2. If a craft port session is being used, proceed to step 3. If using a Telnet session proceed to
step 4.
3. Press until the Login prompt appears.
C +R
TRL
The Login screen is displayed in
login name and associated password.
4. Enter the default login name, "ADMIN" (or the configured login name with System
Administrator privileges), and press
5. Enter the default password, "PASSWORD" (or the configured password), and press
The Login name and Password fields are case sensitive. The default
values are all uppercase. For more information, refer to
Control Menu"
61179605L5-5B
Section 5, User Interface - Logging on to the Total Access 1240
Figure 5-2. The Total Access 1240 system requires the
.
E
NTER
Total Access 1240 - IPoE Fed
Login: ADMIN
Password: ********

Figure 5-2. Login Screen

NOTE
on page 5-36.
E
NTER
"Password
.
5-3