Apply Provisioning to Ports Menu
The Apply Provisioning to Ports menu (see
changes to more than one port. Any number of ports can be selected to apply provisioning.
Unacknowledged Alarms: None
Port Bridge
1.
1
1.
2
1.
3
1.
4
This is service affecting.
The Apply Provisioning to Ports menu options are shown in
Table 5-11. Apply Provisioning to Ports Menu Options
Option
Description
1
Ports to copy to
2
Apply Provisioning
3
Exit without changes
The Apply Provisioning to Ports menu fields are described in
61179605L5-5B
Total Access 1240 - IPoE Fed
Apply Provisioning to Ports
Warning! This is service affecting!
This will copy the following options to the ports you enter!
VPI
VCI
PRI
VLAN
0
35
Low
101
0
36
Low
102
0
37
Low
103
0
38
Low
104
Enter in the form of '1-12,15,24'
1. Ports to copy to:
2. Apply Provisioning
3. Exit without changes
Selection :
'?' - System Help Screen
Figure 5-15. Apply Provisioning to Ports Menu
Function
This option is used to select the specific destination port
numbers that provisioning is to be copied.
This option is used to apply provisioning to the ports
selected from option 1.
This option is used to exits the menu without changes.
Section 5, User Interface - Menu Descriptions
Figure
5-15) is used to apply any provisioning
VPri
ET
LS
DMF
0
Any
N
N
0
Any
N
N
0
Any
N
N
0
Any
N
N
1-24
CAUTION
Table
Table 5-12
Enabled
Yes
Yes
Yes
Yes
5-11.
5-21