Table of Contents
Advertisement
Total Access 1240 Installation and Maintenance Practice
The Bridge User Port Provisioning menu options are shown in
Table 5-8. Bridge User Port Provisioning Menu Options
Option
Description
1
Port
2
Bridge
3
Circuit ID
4
VPI
5
VCI
6
Priority
7
Select Destination Mac Filters
8
VLAN ID
9
VLAN Priority
10
Ether Type
11
Local Switching
12
Enabled/Disabled
13
Save Changes
14
Apply To Other Ports
5-14
Function
This option is used select a Port (1-24).
This option is used to assign a bridge number to each
circuit. Each circuit must be assigned to one of four
bridges.
This option is used to assign a text name to the circuit
for use by the provider to identify the circuit.
This option is used to configure each circuit with the
Virtual Path Identifier (VPI) to match the modem that the
customer is using.
This option is used to configure each circuit with the
Virtual Channel Identifier (VCI) to match the modem
that the customer is using.
This option is used to assign strict prioritization to each
circuit. See
"Strict Prioritization"
This option displays the
Menu"
on page 5-19.
This option is used to assign a VLAN ID. The VLAN ID is
used to uniquely identify a particular VLAN per IEEE
802.1.Q. The parameter for a VLAN ID is a number
between 1 and 4094.
This option displays the
This option is used to assign EtherType Filtering which
is selectable as Any, IP, or PPPoE. See
Filtering"
on page 5-17.
This option is used to enable or disable Local Switching.
Selection of this option toggles between Y(es) and N(o).
See
"Local Switching"
on page 5-18.
This option is used to enable or disable the user port.
This option is used to save any changes made to the
Bridge User Port menu.
This option must be used to implement any provisioning
adjustments.
This option displays the
Menu"
on page 5-21.
Table
5-8.
on page 5-15.
"Router Dest Mac Filtering
"VLAN Priority"
on page 5-16.
"EtherType
"Apply Provisioning to Ports
61179605L5-5B
Advertisement
Table of Contents
