Table of Contents
Advertisement
Total Access 1240 Installation and Maintenance Practice
Time/Date Adjust Menu
The Time/Date Adjust menu (see
configure Simple Network Management Protocol (SNTP) client settings. The time and date
appears on most screens and is also used for performance monitoring displays.
Unacknowledged Alarms: None
The Time/Date Adjust Menu options are shown in
Option
Description
1
Adjust Time
2
Adjust Date
3
SNTP: Status
4
SNTP: Server Addr.
5
SNTP: Poll Int.
5-46
Figure
5-32) is used to set the system time and date and
Total Access 1240 - IPoE Fed
Time/Date Adjust
1. Adjust Time
2. Adjust Date
3. SNTP: Status
4. SNTP: Server Addr. 192.168.1.100
5. SNTP: Poll Int.
6. SNTP: Timezone
Selection :
'?' - System Help Screen
Figure 5-32. Time/Date Adjust Menu
Table 5-34. Time/Date Adjust Menu Options
Function
This option is used to set the time in a 24-hour format.
This option is used to set the date in MM/DD/YY format.
This option is used to enable or disable the SNTP
capabilities.
Simple Network Time Protocol (SNTP) is a connection
less User Datagram Protocol (UDP) used to synchronize
the time with a high-accuracy network time server.
This option is used to set the SNTP server address.
The SNTP server address must be entered in decimal
form in the box provided separated by periods.
This option is used to set the SNTP poll interval.
The SNTP poll interval is the number of seconds that the
adapter waits between sending SNTP requests and
messages to the SNTP server.
3:54
09/01/05
ENABLED
0
0
Table
5-34.
61179605L5-5B
Advertisement
Table of Contents
