Delete Suspended Procedures - GE Definium AMX 700 Operator's Manual

Delete Suspended Procedures

Suspended procedures cannot be deleted unless their status is changed to "Completed" or
"Discontinued"
1. Select the suspended procedure to delete.
A message appears: "The patient entry you are trying to delete is still in progress. Would you like to
mark the patient as 'Completed' / 'Discontinued' and proceed with deletion?"
2. Press [COMPLETE] or [DISCONTINUE].
[COMPLETE] changes the Status to of the procedures to "Completed." If enabled, any acquired
images are auto pushed, auto printed, and sent to PACS.
[DISCONTINUE] changes the Status to "Discontinued." Any acquired images are marked as
Discontinued and the information is sent to PACS.
[CANCEL] closes the message and returns you to the Worklist without deleting procedures.
The procedures are removed from the Worklist.
Definium AMX 700 X-Ray System
Operator Manual
5161515-1EN Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A3: Worklist
A3-14