Worklist
Worklist preferences are available from the Utilities screen.
1. On the Worklist screen, press [UTILITIES].
2. Select Preferences > Worklist.
Figure A7-9 Preferences – Worklist screen
Default Query
The Worklist Default Query controls the amount of HIS/RIS information that appears on the Worklist and
allows you to enable and configure the auto-refresh function.
1. Complete or edit the Worklist Default Query screen (Figure A7-10). Table A7-6 describes the fields in
detail.
2. Press [SAVE] to change the Default Query.
Definium AMX 700 X-Ray System
Operator Manual
5161515-1EN
Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A7: Set Preferences
A7-13