Select Procedures; Select A Single Procedure; Select Multiple Procedures; Delete Procedures - GE Definium AMX 700 Operator's Manual

Select Procedures

Use the following processes to select a patient from the Worklist. This process assumes the patient
already exists on the system. If the patient is not on the Worklist, you must add the patient first. Refer to
Overview (p. A3-15) for more information.

Select a Single Procedure

1. Close or suspend any open exams, if necessary. Refer to
(p. A4-13) for more information.
The Worklist screen appears.
2. Select the procedure from the Worklist.
3. Refer to Chapter A4: Image Acquisition

Select Multiple Procedures

You may select multiple procedures for the same patient to begin image acquisition.
NOTE: The Patient Name, Patient ID #, and Exam Date must match exactly in order to be selected.
1. Sort the Worklist by Patient Name, if necessary.
2. Press procedure.
3. Press another procedure for the same patient.
4. Continue pressing procedures until all procedures for the patient are selected.
5. Press any other procedure to deselect the procedures.

Delete Procedures

You may remove procedures from the Worklist individually or all completed, discontinued, and locally
added procedures at once.
The [DELETE] button is able to switch between individual delete or delete all.
NOTE: Deleted procedures cannot be recovered or "undeleted."
To switch the button between "Delete" and "Delete All":
1. Press on the small arrow on the right side of the button.
A list appears with the available actions.
Definium AMX 700 X-Ray System
Operator Manual
to conduct the exam.
5161515-1EN Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A3: Worklist
Chapter A4: Image Acquisition-End Exam
A3-12