Configure Enterprise Authorization - GE Definium AMX 700 Operator's Manual

Table B-1 Configuration function descriptions
Function
Inactivity timeout
Display Emergency
Button
Display Emergency
Prompt
Cache Enterprise Users
Enable Enterprise
Authentication
Enable Authorization
[APPLY
CONFIGURATION]
[RESTORE]

Configure Enterprise Authorization

The Configure-Enterprise Tab is used by the site's IT (Information Technology) or GE Service personnel. It
provides connectivity to the site's user database. If you do not have a network established in your facility,
this tab will not be used.
When the fields on the left side of the screen are completed, press [GENERATE DEFAULTS] to auto-
populate the fields on the right side with suggested defaults. Modify the information as appropriate.
Press [APPLY CONFIGURATION] to apply the settings.
The [RESTORE] button resets the tab to the last saved settings.
Definium AMX 700 X-Ray System
Operator Manual
This function is not implemented for the Definium AMX 700.
IMPORTANT!: Do not enable or change the setting on this function.
Enabling or changing this function may cause conflicts with
the system software.
Sets the number of minutes before automatic logout will occur. For
example, if you enter 10 minutes, the system will display the splash screen
after 10 minutes of inactivity (no keyboard entry or mouse movements),
requiring the user to log in. When logging back in, the system is returned
to its last know state.
To disable inactivity timeout, enter "0".
Allows the Emergency Login button to be shown on the Login screen. If
this button is not displayed, only those users with a valid account can log
onto the system.
When the [EMERGENCY LOGIN] button is clicked, displays a prompt that
requires emergency users enter their names.
Allows all users previously set up on the system to log in even if the site
network is down.
Verifies users and what privileges they have based on the network
settings at your site.
For facilities with enterprise login, enables checking group membership
before allowing users to enter the system. With authorization, you must
add user groups to the group tab in order to let people log in.
Applies the settings.
Restores the setting to the last applied configuration. That is, when the
[APPLY CONFIGURATION] button was last clicked.
5161515-1EN
© 2008 General Electric Company. All rights reserved.
Appendix B: Login Administration
Description
Rev. 6 (10 February 2008)
B-13